|
|
|
|
|
To load the file test.bit up from address 0x0000 in MCS format, enter the following information at the command line.
promgen -u 0 test
To daisy-chain the files test1.bit and test2.bit up from address 0x0000 and the files test3.bit and test4.bit from address 0x4000 while using a 32K PROM and the Motorola EXORmax format, enter the following information at the command line.
promgen -s 32 -p exo -u 00 test1 test2 -u 4000 test3 test4
To load the file test.bit into the PROM programmer in a downward direction starting at address 0x400, using a Xilinx XC1718D PROM, enter the following information at the command line.
promgen -x xc1718d -d 0x400 test
To specify a PROM file name that is different from the default file name enter the following information at the command line.
promgen options filename -o newfilename