X74_165S

8-Bit Loadable Serial/Parallel-In Parallel-Out Shift Register with Clock Enable

X74_165S is an 8-bit shift register with serial-input (SI), parallel- inputs (H - A), parallel-outputs (QH - QA), and two control inputs - clock enable (CE) and active-Low shift/load enable (S_L). When S_L is Low, data on the H - A inputs is loaded into the corresponding QH - QA bits of the register on the Low-to-High clock (CK) transition. When CE and S_L are High, data on the SI input is loaded into the first bit of the register during the Low-to-High clock transition. During subsequent Low-to-High clock transitions, with CE and S_L High, the data is shifted to the next-highest bit position (shift right) as new data is loaded into QA (SI QA, QAQB, QBQC, and so forth). The register ignores clock transitions when CE is Low and S_L is High.

Registers can be cascaded by connecting the QH output of one stage to the SI input of the next stage and connecting clock, CE, and S_L inputs in parallel.

Inputs					Outputs
S_L	CE	SI	A - H	CK	QA	QB - QH
0	X	X	A - H		qa	qb - qh
1	0	X	X	X	No Chg	No Chg
1	1	SI	X		si	qA - qG
si = state of referenced input one setup time prior to active clock transition qn = state of referenced output one setup time prior to active clock transition

Figure 11.26 X74_165S Implementation XC3000, XC4000E, XC4000X, XC5200, XC9000, Spartan, SpartanXL