FTPE

Toggle Flip-Flop with Toggle and Clock Enable and Asynchronous Preset

FTPE is a toggle flip-flop with toggle and clock enable and asynchronous preset. When the asynchronous preset (PRE) input is High, all other inputs are ignored and output Q is set High. When the toggle enable input (T) is High, clock enable (CE) is High, and PRE is Low, output Q toggles, or changes state, during the Low-to-High clock transition. When CE is Low, clock transitions are ignored.

For FPGAs, the flip-flop is asynchronously preset to output High, when power is applied. FPGAs simulate power-on when global reset (GR for XC5200) or global set/reset (GSR for XC4000, Spartans, Virtex) is active. The GR/GSR active level defaults to active-High but can be inverted by adding an inverter in front of the GR/GSR input of the STARTUP, STARTUP_SPARTAN2, or STARTUP_VIRTEX symbol.

For CPLDs, the flip-flop is asynchronously cleared, output Low, when power is applied. The power-on condition can be simulated by applying a High-level pulse on the PRLD global net.

Inputs				Outputs
PRE	CE	T	C	Q
1	X	X	X	1
0	0	X	X	No Chg
0	1	0	X	No Chg
0	1	1		Toggle

Figure 5.61 FTPE Implementation XC4000E, XC4000X, XC5200, Spartan, SpartanXL, Spartan2, Virtex

Figure 5.62 FTPE Implementation XC9000