|
|
|
|
|
The following table describes some example commands.
| Command | Description |
|---|---|
| speedprint | Prints usage message |
| speedprint xc4044xl | Uses the default speed grade |
| speedprint -s -3 xc4044xl speedprint -s 3 xc4044xl | Both commands display block delays for speed grade -3 |
| speedprint -v 3.0 -t 40 xc4044xl | Uses default speed grade at 3.0 volts and 40 degrees C |
| speedprint -s min xc4044xl speedprint -min xc4044xl | Both commands display data for the minimum speed grade. |